shelters to go portable shelters

Central Point • Oregon • 97502 • (541)727-8496 EMAIL

Get versatility by the piece for your shelter solutions!!

....

FACTS REGARDING SHELTER SLOPE:

Low peak: 102 degree slope. 2.5" rise per foot
Not Recommended for use with Valance Tarps

Medium peak: 110 degree slope. 4" rise per foot

High peak: 120 degree slope. 7" rise per foot

Size of connectors refers to the size of the pipe used... not the inner diameter of the connector. MORE ON PIPE SIZE HERE.

  • 3/4" Connectors: For use with 3/4" EMT Conduit poles
  • 1" Connectors: For use with 1" EMT Conduit poles
  • 1 3/8" Connectors: For use with 1 3/8" chain link pipe poles
  • 1 5/8" Connectors: For use with 1 5/8" chain link pipe poles

HOME PAGE
SITE MAP
Shopping Cart Summary
Items in basket: 0
Subtotal: $ 0.00



3/4" FLAT (90 DEGREE) SHELTER CONNECTORS
MACHINE WELDED HEAVY DUTY STEEL -
ANODIZED ZINC COATING - GOLD COLOR:

Elbows, Tees, Braces, Anchors, Sleeves, Sign Holders, Foot Pads

To order from this page, enter the Qty and click the check box to add an item to the order list. At the end of the page, click the 'Put these in my shopping basket' button to add all items you have selected from this page at the same time. You will have the opportunity to change your order from the shopping cart page.


#F3 Flat Corner 3/4" Anodized zinc coating - gold color $13.00 each

Enter Qty Click Box

#FO3 Through Corner Connector 3/4" Anodized zinc coating - gold color $8.50 each

Enter Qty Click Box

#F4 Flat Side 3/4" Anodized zinc coating - gold color $17.00 each

Enter Qty Click Box

#F5 Flat 5-Way 3/4" Anodized zinc coating - gold color $22.00 each

Enter Qty Click Box

#F6 Flat 6-Way 3/4" Anodized zinc coating - gold color $18.00 each

Enter Qty Click Box

#FC 2-Way Connector used to join two shorter poles. Handy for shelters being transported a lot so shorter sections of EMT can be used.3/4" Anodized zinc coating - gold color $7.50 each

Enter Qty Click Box

#FL Elbow 3/4" Anodized zinc coating - gold color $7.00 each

Enter Qty Click Box

#FOL Through Elbow 2-Way Connector 3/4" Anodized zinc coating - gold color $6.00 each

Enter Qty Click Box

#FT Tee3/4" Anodized zinc coating - gold color $14.00 each

Enter Qty Click Box

#FOT 3-way Through TEE Connector 3/4" Anodized zinc coating - gold color @ $12.50 each

Enter Qty Click Box

#FX Flat cross 3/4" Anodized zinc coating - gold color $12.50 each

Enter Qty Click Box

#FCA Anchor Sleeve 3/4" Anodized zinc coating - gold color $7.00 each

Enter Qty Click Box

#FP Foot Pad Anchor. Used for bolting to footings, decking or other solid surface. 3/4" Anodized zinc coating - gold color $8.50

Enter Qty Click Box

#FP2 Foot Pad L 3/4" Anodized zinc coating - gold color $9.00 each

Enter Qty Click Box

#FP3C Foot Pad Corner 3/4" Anodized zinc coating - gold color $11.00 each

Enter Qty Click Box

#FP3T Foot Pad T 3/4" Anodized zinc coating - gold color $11.00 each

Enter Qty Click Box

#FPM Mini Foot Pad 3/4" Anodized zinc coating - gold color $3.30 each

Enter Qty Click Box

#SH Sign Holder 3/4" Anodized zinc coating - gold color $8.50 each

Enter Qty Click Box


Prices are subject to change without prior notice. We also reserve the right to correct content on these pages in case of error. You will be notified if there is a change that affects your order.

TO TOP OF PAGE


TarpsConnectorsAccessoriesHomeEmailShelter Drawings

 
We use the Dansie Shopping Cart on our webstores. ..

........ 

Warning: These building connectors are component parts for use in assembling portable or limited use structures only. Severe physical injury or death may result from the collapse of a structure which fails to use the proper component parts, is not properly anchored, or which lacks proper foundation support and structural integrity to withstand wind, rain, other weather related factors, and stress from the particular use. DTP, Ink, shelters-to-go.com or any of it's parties will not be held responsible for injury, death or other losses related to the use of these components.

To put this in terms that are understandable by all: It means use the correct weight poles (not aluminum or pvc), use the correct number of connectors (don't skimp), structures are designed for use with tarps (don't nail wood to them or cover with unapproved materials!), make sure they are anchored properly (one anchor per leg of approved type for the installation). And last but not least.... these structures won't withstand hurricanes, tornados, heavy snow loads or any other act of nature, man or animal that would trash a portable metal storage building but they are a lot easier to put up and more versatile for size, shape and use!


Web Design by DTP, Ink
All material on this website is copyright ©DTP, Ink